Main uses

Lokfix E77 is Fosroc’s solution for large and heavy duty anchoring into cracked and un-cracked concrete. It is also suitable for anchoring heavy duty rebar. It has industry leading strength and low partial safety factors with a design life tested up to 100 years. Applied with 3:1 application gun, it may be used in dry, damp and flooded conditions. Comes with industry leading accreditation and design software. For concrete (solid, porous and light), masonry and hollow bricks.

• Accredited* for use in dry, wet and flooded concrete substrates, internal and external exposure.
• Can be used with cracked concrete
• Fixing of post installed reinforcement and tension anchors
• Anchoring of threaded rod fixings
• Anchoring of internal threaded rod sleeves
• Can be applied to a wide variety of fixing and rebar sizes
• For horizontal, vertical and overhead application
• Bonding and surface crack sealing applications prior to Nitofill injection.

Advantages

• High durability: Tested to achieve 100 year design life*
• High Bond strengths for heavyweight fixings or economical design.
• No additional mixing equipment required
• Does not apply expansive force to the substrate
• Fixings can be spaced closer together than mechanical anchors
• Enables fixings closer to edges than mechanical anchors
• Low VOC
• Re-usable by replacing sealing cap  product may be kept to the end of original shelf life.
• Tested with diamond drilled bore holes*
• Waterproof, protecting the embedded fixing from corrosion and water penetration into the substrate.
• Extended gel times allow for more complex procedures
• Fire rated up to 2 hours*
• 24 month shelf life
• C1  and C2 seismic resistance*

* Always consult technical information for specific details