Fosroc
Elastomeric Bearings
Fosroc Elastomeric Bearing pads comprise an elastomeric block in which parallel and plane reinforcement plates are totally embedded before vulcanization.AdvantagesAbsorb stresses from vertical and horizontal loads Accommodates rotations and horizontal displacements Accommodate movements due to variations in temperature, creep or shrinkage High durability Main UsesFosroc Elastomeric Bearing pads comprise an elastomeric block in which parallel and plane reinforcement plates are totally embedded before vulcanization. The vulcanization of the block gives the elastomer its mechanical characteristics and ensures the perfect bonding of steel and rubber. Full protection of the steel from corrosion is assured.They are supplied in bespoke sizes to meet project requirements.PTFE Sliding elastomeric bearings and Stainless Steel plate elastomeric bearings are also available.System Application ThicknessStandard System ThicknessCoverage & Consumption RateRefer to TDS
SKU: API-1012
About this itemCIVIL SPEC APPROVED
- Shore D Hardness: 60 +/-5 as per ASTM D2240 standard. DURABLE NEOPRENE ELASTOMER
- Tensile Strength: Exceeds 17 MPa as per ASTM D412 standard. SEISMIC RESISTANCE
- Elongation at Break: Greater than 350% as per ASTM D412 standard. CUSTOM SIZES AVAILABLE
- Compression Set: Less than 35% after 22 hours at 100°C as per ASTM D395 standard. CORROSION PROTECTION
Instant Technical & Sales Hotline24/7 AVAILABLE
Contact for PriceEXCL. VAT
Qty:
1
In Stock · Express Delivery
Secure Payments7-Day Returns
Product WarrantyVAT-invoice
Uses & Advantages
Primary Uses
- Highway bridge decks
- Trafficked access decks in elevated structures
- Ramps
- Overpasses
- High-rise buildings
- Water reservoirs
- Structures to sustain seismic activities
Key Advantages
- Absorbs stresses from vertical and horizontal loads
- Accommodates rotations and horizontal displacements
- Handles movements due to temperature variations, creep, or shrinkage
- High durability and long service life
- Corrosion protection for embedded steel plates
FEATURES & BENEFITS
Shore D Hardness
60 +/-5 as per ASTM D2240 standard.
Tensile Strength
Exceeds 17 MPa as per ASTM D412 standard.
Elongation at Break
Greater than 350% as per ASTM D412 standard.
Compression Set
Less than 35% after 22 hours at 100°C as per ASTM D395 standard.
Ozone Ageing Resistance
No cracks observed after 48 hours at 40°C as per ASTM D1149 standard.
Steel Compliance
Reinforced steel plates comply with ASTM A36 standard.
Key Specifications
Ozone AgeingNo cracks
Compression Set<35%
Standard ColourBlack
Shore D Hardness60 +/-5
Tensile Strength>17 MPa
Elongation at Break>350%
Packaging / Pack SizeIndividual bespoke units
Certified standard values under UAE climate conditions.
DOWNLOADS & DATA SHEETS
Storage & Handling Guidelines
- Store in a clean area.
- Ensure the storage space is dry.
- Maintain proper ventilation in the storage area.
RATINGS & REVIEWS
Be the first to review this product
Share your project experience, workability, and technical results with other engineers and contractors in the UAE.
