PILEHEAD
BLACK
Nitocote NT402 BLACK

Fosroc

Nitocote NT402 BLACK

Nitocote NT402 is based on selected epoxy resins. It is supplied as a two pack material in pre-weighed quantities ready for on-site mixing and use. Environment friendly - no VOC. Totally free of carcinogenic materials like coat tar, pitch and aromatic hydrocarbons. Low cost service life - excellent chemical and abrasion resistance, does not support bacterial growth. Cost saving - primerless system. Added value system - acts as an impermeable waterproof coating and excellent resistance to underground environment.
Write a review
SKU: FOSROC-CAT-2420
Color:BLACK

About this itemCIVIL SPEC APPROVED

  • Solids Content: 100% solids epoxy resin ensures maximum durability and performance. ENVIRONMENTALLY FRIENDLY
  • Chemical Resistance: Resistant to acids, alkalis, salt solutions, and raw sewage, providing long-term protection. 100% SOLIDS CONTENT
  • Abrasion Resistance: Less than 50 mg weight loss after 1000 cycles under ASTM D4060-CS10 testing. NO VOCS
  • Adhesion Strength: Achieves 2.0 N/mm² adhesion strength as per ASTM D4541 standards. PRIMERLESS APPLICATION

Instant Technical & Sales Hotline24/7 AVAILABLE

WhatsApp Us+971 54 765 6789
460.00AEDEXCL. VAT
Total (Incl. 5% VAT)483.00 AED
Pack Size:Original Packaging
Qty:
1
In Stock · Express Delivery
Chat With UsGet PDF Quote
Secure Payments7-Day Returns
Product WarrantyVAT-invoice

Uses & Advantages

Primary Uses

  • Seawater tanks, channels, and intakes
  • Manhole and pipe linings
  • Sewage works and effluent plants
  • Chemical processing facilities
  • Foundation waterproofing
  • Jetties, piers, and docks

Key Advantages

  • Environmentally friendly with no VOCs or carcinogenic materials
  • Excellent chemical and abrasion resistance
  • Primerless system for cost-effective application
  • Acts as an impermeable waterproof coating
  • Resistant to bacterial and fungal growth
  • Provides long-lasting protection against corrosion

FEATURES & BENEFITS

TECHNICAL DATASHEET SPEC

Solids Content

100% solids epoxy resin ensures maximum durability and performance.

Chemical Resistance

Resistant to acids, alkalis, salt solutions, and raw sewage, providing long-term protection.

Abrasion Resistance

Less than 50 mg weight loss after 1000 cycles under ASTM D4060-CS10 testing.

Adhesion Strength

Achieves 2.0 N/mm² adhesion strength as per ASTM D4541 standards.

Water Absorption

Demonstrates negligible water absorption under ASTM C642 testing.

Curing Time

Tack-free in 2-3 hours at 23°C and fully cures in 4 days at 23°C.

Resistance to Chloride and Sulphate Ions

Proven resistance to chloride and sulphate ion penetration under AASHTO standards.

Resistance to Bacterial and Fungal Growth

Resistant to bacterial and fungal growth as per AWWA/APHA and ASTM D3273 standards.

Key Specifications

Origin: UAE
Solids Content100%
Specific Gravity1.35 g/cm³ at 23°C
Water AbsorptionNil after immersion at 23°C, 0.1% after immersion & boiling (ASTM C642
Adhesion Strength2.0 N/mm² (ASTM D4541
Pot Life at 23°C45 minutes
Pot Life at 35°C20 minutes
Full Cure at 23°C4 days
Abrasion Resistance< 50 mg weight loss (ASTM D4060CS10
Tack Free Time at 23°C23 hours
Packaging / Pack SizeAvailable in 10litre and 400litre packs.
Coverage / Yield5.0 m²/litre @ 200 microns wet film thickness per coat
Certified standard values under UAE climate conditions.

DOWNLOADS & DATA SHEETS

TDSBASE SDSHARDENERMSNitocote NT402 TDS

Storage & Handling Guidelines

  • Store in a cool, dry environment below 35°C.
  • Avoid exposure to direct sunlight.
  • Ensure containers are tightly sealed when not in use.
  • Shelf life is 12 months for 10-litre packs and 3 months for 500 kg bulk packs.
Product packaging

FREQUENTLY ASKED QUESTIONS

Q&A TECHNICAL HUB
It is used as a protective coating for concrete structures to prevent water ingress and chemical attack.

RATINGS & REVIEWS

Be the first to review this product

Share your project experience, workability, and technical results with other engineers and contractors in the UAE.