Mapei
ADESILEX PG2
About this itemMAPEI CERTIFIED
- Composition: Two-component products based on epoxy resins, selected fine-grain aggregates, and special additives. TWO-COMPONENT THIXOTROPIC EPOXY ADHESIVE
- Consistency of Mix: Thixotropic paste, allowing for vertical or overhead application without slipping. STRUCTURAL BONDING
- Hardening Process: Hardens by chemical reticulation without shrinkage; Adesilex PG1 sets in approximately 3 hours, Adesilex PG2 in 5 hours (at +23°C). VERY LOW VOC (EMICODE EC1 PLUS)
- Surface Compatibility: Can be applied on very damp surfaces, provided there is no standing water. EN 1504 COMPLIANT
Instant Technical & Sales Hotline24/7 AVAILABLE
Uses & Advantages
Primary Uses
- Structural reinforcement of beams and pillars by bonding steel or composite material plates to concrete.
- Non-flexible structural bonding of precast concrete elements.
- Sealing injectors and surface damage before injection of epoxy resins by low-pressure pump.
- Sealing large cracks and repairing joint corners in industrial flooring subject to traffic.
- Bonding fibre-reinforced cement slabs and pipes.
- Waterproofing large size joints by bonding TPE strips to concrete.
Key Advantages
- Delivers exceptional bonding and mechanical strength.
- Thixotropic consistency allows easy application on vertical structures and ceilings without slipping, up to 1 cm thick in a single layer.
- Hardens by chemical reticulation without shrinkage.
- Suitable for application on very damp surfaces, provided there is no standing water.
- Achieves EMICODE EC1 Plus certification for very low emissions of volatile organic compounds.
- Meets European standards EN 1504-9 and EN 1504-4 for concrete repair and structural bonding.
FEATURES & BENEFITS
Composition
Two-component products based on epoxy resins, selected fine-grain aggregates, and special additives.
Consistency of Mix
Thixotropic paste, allowing for vertical or overhead application without slipping.
Hardening Process
Hardens by chemical reticulation without shrinkage; Adesilex PG1 sets in approximately 3 hours, Adesilex PG2 in 5 hours (at +23°C).
Surface Compatibility
Can be applied on very damp surfaces, provided there is no standing water.
Temperature Adaptability
Adesilex PG1 is ideal for applications between +5°C and +23°C, while Adesilex PG2 is recommended for higher temperatures.
Standard Compliance
Meets EN 1504-9 (General principles for concrete protection and repair) and EN 1504-4 (Structural bonding).
VOC Emissions
Certified EMICODE EC1 Plus - very low emission.
Key Specifications
DOWNLOADS & DATA SHEETS
Key Performance Benefits
Composition
Two-component products based on epoxy resins, selected fine-grain aggregates, and special additives.
Consistency of Mix
Thixotropic paste, allowing for vertical or overhead application without slipping.
Hardening Process
Hardens by chemical reticulation without shrinkage; Adesilex PG1 sets in approximately 3 hours, Adesilex PG2 in 5 hours (at +23°C).
Surface Compatibility
Can be applied on very damp surfaces, provided there is no standing water.
Temperature Adaptability
Adesilex PG1 is ideal for applications between +5°C and +23°C, while Adesilex PG2 is recommended for higher temperatures.
Standard Compliance
Meets EN 1504-9 (General principles for concrete protection and repair) and EN 1504-4 (Structural bonding).
VOC Emissions
Certified EMICODE EC1 Plus - very low emission.
Storage & Handling Guidelines
- Store products in their original, unopened packaging for up to 24 months. Maintain storage temperatures not below +5°C.
- During mixing, the product generates considerable heat. Apply the product as soon as possible after mixing and never leave the container unattended until it is completely empty.
- For applications in summer conditions (above +23°C), use Adesilex PG2, avoid direct sunlight, and perform bonding during the cooler hours of the day to prevent rapid hardening. In winter conditions (below +10°C), use Adesilex PG1; heat the substrate at least 24 hours before bonding and maintain thermal insulation for at least 24 hours after application. Store the product in a heated environment before use.
- Due to the high bonding strength, even to metal, it is recommended to clean working tools with solvents (e.g., ethyl alcohol, toluol) before the product hardens.
Why Buy From pilehead.com?
FREQUENTLY ASKED QUESTIONS
RATINGS & REVIEWS
Be the first to review this product
Share your project experience, workability, and technical results with other engineers and contractors in the UAE.
