PILEHEAD
CERFIX PROJOINT DIL PAS

Mapei

CERFIX PROJOINT DIL PAS

Projoint DIL PAS is a structural joint composed of two L-shaped profiles in natural aluminium and an expanding part in interchangeable EPDM, available in black or grey.
Write a review
SKU: MAPEI-CERFIX-PROJOINT-DIL-PAS-72

About this itemMAPEI CERTIFIED

  • Horizontal and Vertical Expansion: PBH/65: Horizontal expansion +/- 7 mm, Vertical expansion +/- 5 mm; PBH/75: Horizontal expansion +/- 12 mm, Vertical expansion +/- 7 mm; PAS/105 and PAS/125: Expansion +/- 10 mm. LOAD-BEARING STRUCTURAL JOINTS
  • Load Capacity: PBH: Supports pedestrians, light trolleys, stretchers, cars up to 9.8 kN, and trucks up to 35 kN (maximum load on pneumatic wheel: 11 kN). PAS: Supports pedestrians, light trolleys, stretchers, cars up to 6.9 kN, and trucks up to 30 kN (maximum load on pneumatic wheel: 9.8 kN). DURABLE ALUMINIUM AND EPDM MATERIALS
  • Material Composition: Profiles are made of natural aluminium (Al-Mg-Si aluminium, heat-treated in T6 - 6060 T6) and black extruded EPDM compound. WIDE TEMPERATURE RANGE COMPATIBILITY
  • Chemical and Physical Properties of EPDM: Excellent resistance to ozone and atmospheric agents; good resistance to hot air (up to 130°C), steam, low temperature hardening, ketones, bases, and water/seawater; sufficient resistance to strong mineral acids and dilute acids; not suitable for aliphatic hydrocarbons, paraffin-based mineral oils, chlorinated solvents, or flames. MAPEI CERTIFIED

Instant Technical & Sales Hotline24/7 AVAILABLE

WhatsApp Us+971 54 765 6789
Contact for PriceEXCL. VAT
Qty:
1
Available for Order
Chat With UsGet PDF Quote
Secure Payments7-Day Returns
Product WarrantyVAT-invoice

Uses & Advantages

Primary Uses

  • Accommodating structural movement in tiled surfaces
  • Supporting pedestrian, light trolley, stretcher, and vehicular traffic

Key Advantages

  • Durable construction with natural aluminium and EPDM materials
  • High resistance to chemical and atmospheric agents
  • Wide operating temperature range from -40°C to +110°C
  • Load capacities up to 35 kN for PBH and 30 kN for PAS

FEATURES & BENEFITS

TECHNICAL DATASHEET SPEC

Horizontal and Vertical Expansion

PBH/65: Horizontal expansion +/- 7 mm, Vertical expansion +/- 5 mm; PBH/75: Horizontal expansion +/- 12 mm, Vertical expansion +/- 7 mm; PAS/105 and PAS/125: Expansion +/- 10 mm.

Load Capacity

PBH: Supports pedestrians, light trolleys, stretchers, cars up to 9.8 kN, and trucks up to 35 kN (maximum load on pneumatic wheel: 11 kN). PAS: Supports pedestrians, light trolleys, stretchers, cars up to 6.9 kN, and trucks up to 30 kN (maximum load on pneumatic wheel: 9.8 kN).

Material Composition

Profiles are made of natural aluminium (Al-Mg-Si aluminium, heat-treated in T6 - 6060 T6) and black extruded EPDM compound.

Chemical and Physical Properties of EPDM

Excellent resistance to ozone and atmospheric agents; good resistance to hot air (up to 130°C), steam, low temperature hardening, ketones, bases, and water/seawater; sufficient resistance to strong mineral acids and dilute acids; not suitable for aliphatic hydrocarbons, paraffin-based mineral oils, chlorinated solvents, or flames.

Projoint DIL PBH and PAS are high-performance load-bearing structural movement joints designed for use in construction projects. These joints feature two opposing L-shaped profiles made from natural aluminium and an interchangeable EPDM component, available in black or grey. They are engineered to accommodate both horizontal and vertical expansions, making them suitable for a variety of applications, including pedestrian areas, light trolleys, and even vehicular traffic.

Key Specifications

Origin: UAE
MaterialNatural aluminium and black extruded EPDM compound
Operating Temperature Range-40°C to +110°C
PBH/65 Horizontal Expansion+/- 7 mm
PBH/65 Vertical Expansion+/- 5 mm
PBH/75 Horizontal Expansion+/- 12 mm
PBH/75 Vertical Expansion+/- 7 mm
Packaging / Pack SizeSupplied with mechanical dowels for installation.
Certified standard values under UAE climate conditions.

DOWNLOADS & DATA SHEETS

Mapei CERFIX PROJOINT DIL PAS Method StatementMapei CERFIX PROJOINT DIL PAS TDS

Key Performance Benefits

  • Horizontal and Vertical Expansion

    PBH/65: Horizontal expansion +/- 7 mm, Vertical expansion +/- 5 mm; PBH/75: Horizontal expansion +/- 12 mm, Vertical expansion +/- 7 mm; PAS/105 and PAS/125: Expansion +/- 10 mm.

  • Load Capacity

    PBH: Supports pedestrians, light trolleys, stretchers, cars up to 9.8 kN, and trucks up to 35 kN (maximum load on pneumatic wheel: 11 kN). PAS: Supports pedestrians, light trolleys, stretchers, cars up to 6.9 kN, and trucks up to 30 kN (maximum load on pneumatic wheel: 9.8 kN).

  • Material Composition

    Profiles are made of natural aluminium (Al-Mg-Si aluminium, heat-treated in T6 - 6060 T6) and black extruded EPDM compound.

  • Chemical and Physical Properties of EPDM

    Excellent resistance to ozone and atmospheric agents; good resistance to hot air (up to 130°C), steam, low temperature hardening, ketones, bases, and water/seawater; sufficient resistance to strong mineral acids and dilute acids; not suitable for aliphatic hydrocarbons, paraffin-based mineral oils, chlorinated solvents, or flames.

Storage & Handling Guidelines

  • Handle profiles with care to avoid scratches or damage to the aluminium surface.
  • Wear suitable gloves during handling to prevent injury or cuts.
Product packaging

Why Buy From pilehead.com?

Genuine Mapei Product
Competitive Pricing
Bulk Order Support
Reliable UAE Delivery

FREQUENTLY ASKED QUESTIONS

Q&A TECHNICAL HUB
The profiles require 7 mechanical dowels per meter for installation, spaced every 30 cm.

RATINGS & REVIEWS

Be the first to review this product

Share your project experience, workability, and technical results with other engineers and contractors in the UAE.