PILEHEAD
MAPEFIX POLYBOND

Mapei

MAPEFIX POLYBOND

Polyester, resin-based chemical fastener for heavy loads. Certified for threaded rods in concrete.
Write a review
SKU: MAPEI-MAPEFIX-POLYBOND-411

About this itemMAPEI CERTIFIED

  • Composition: Two-component polyester resin-based chemical anchor supplied in 300 ml and 420 ml cartridges with separate components A (resin) and B (catalyser). TWO-COMPONENT CHEMICAL ANCHOR
  • Application Temperature: Usable at substrate temperatures from 0°C to +40°C. Workability decreases at higher temperatures. ETA-CERTIFIED FOR NON-CRACKED CONCRETE
  • Performance Characteristics: Compressive strength: 75 N/mm², Flexural strength: 30 N/mm², Dynamic modulus of elasticity: 4000 N/mm². SUITABLE FOR INDOOR AND OUTDOOR USE
  • Service Temperature: Operational range from -40°C to +50°C, with temporary peak temperatures up to +80°C. MAPEI CERTIFIED

Instant Technical & Sales Hotline24/7 AVAILABLE

WhatsApp Us+971 54 765 6789
Contact for PriceEXCL. VAT
Qty:
1
Available for Order
Chat With UsGet PDF Quote
Secure Payments7-Day Returns
Product WarrantyVAT-invoice

Uses & Advantages

Primary Uses

  • Anchoring threaded bars in concrete and lightweight concrete
  • Securing components in hollow brick substrates and mixed walls
  • Installing plant equipment, sanitary fittings, antennas, signs, and window/door fittings

Key Advantages

  • No stress generated, making it ideal for close-to-edge installations
  • Can be used on horizontal, vertical, sloping, and overhead surfaces
  • Compatible with dry and damp substrates
  • Available in versions for hot and cold climates

FEATURES & BENEFITS

TECHNICAL DATASHEET SPEC

Composition

Two-component polyester resin-based chemical anchor supplied in 300 ml and 420 ml cartridges with separate components A (resin) and B (catalyser).

Application Temperature

Usable at substrate temperatures from 0°C to +40°C. Workability decreases at higher temperatures.

Performance Characteristics

Compressive strength: 75 N/mm², Flexural strength: 30 N/mm², Dynamic modulus of elasticity: 4000 N/mm².

Service Temperature

Operational range from -40°C to +50°C, with temporary peak temperatures up to +80°C.

Resistance

Excellent resistance to water, good resistance to UV rays and chemicals.

MAPEFIX POLYBOND is a high-performance, two-component polyester resin-based chemical anchor designed for securely anchoring metal bars into concrete and other substrates. It is ideal for applications requiring high load-bearing capacity, including installations in non-cracked concrete, lightweight concrete, masonry, and stone. With excellent resistance to water, chemicals, and UV rays, it is suitable for both indoor and outdoor use.

Key Specifications

Origin: UAE
Density1.74 g/cm³
ColourLight grey
Application Temperature0°C to +40°C
Service Temperature-40°C to +50°C (temporary peak +80°C
Compressive Strength75 N/mm²
Flexural Strength30 N/mm²
Packaging / Pack SizeAvailable in boxes of 12 x 300 ml or 420 ml cartridges, each with 12 static mixers.
Certified standard values under UAE climate conditions.

DOWNLOADS & DATA SHEETS

Mapei MAPEFIX POLYBOND SDSMapei MAPEFIX POLYBOND Method StatementMapei MAPEFIX POLYBOND TDS

Key Performance Benefits

  • Composition

    Two-component polyester resin-based chemical anchor supplied in 300 ml and 420 ml cartridges with separate components A (resin) and B (catalyser).

  • Application Temperature

    Usable at substrate temperatures from 0°C to +40°C. Workability decreases at higher temperatures.

  • Performance Characteristics

    Compressive strength: 75 N/mm², Flexural strength: 30 N/mm², Dynamic modulus of elasticity: 4000 N/mm².

  • Service Temperature

    Operational range from -40°C to +50°C, with temporary peak temperatures up to +80°C.

  • Resistance

    Excellent resistance to water, good resistance to UV rays and chemicals.

Storage & Handling Guidelines

  • Store in original packaging at temperatures between +5°C and +25°C.
  • Ensure adequate ventilation during application and avoid contact with skin and eyes.
Product packaging

Why Buy From pilehead.com?

Genuine Mapei Product
Competitive Pricing
Bulk Order Support
Reliable UAE Delivery

FREQUENTLY ASKED QUESTIONS

Q&A TECHNICAL HUB
Coverage depends on the volume of the hole and the anchoring depth. For example, a 300 ml cartridge can fill approximately 161 holes for M8 bars at a 60 mm anchoring depth, while a 420 ml cartridge can fill approximately 225 holes under the same conditions.

RATINGS & REVIEWS

Be the first to review this product

Share your project experience, workability, and technical results with other engineers and contractors in the UAE.