Mapei
MAPEROD G
About this itemMAPEI CERTIFIED
- Maperod C: Pultruded carbon fiber bars with an epoxy matrix, available in diameters of 8, 10, and 12 mm. High tensile strength of 2,000 N/mm², modulus of elasticity of 155 GPa, and elongation at failure of 1.5%. HIGH TENSILE STRENGTH
- Maperod G: Pultruded glass fiber bars with an epoxy-modified vinylester matrix, available in a diameter of 10 mm. High tensile strength of 760 N/mm², modulus of elasticity of 40.8 GPa, and elongation at failure of 2%. LIGHTWEIGHT
Instant Technical & Sales Hotline24/7 AVAILABLE
Uses & Advantages
Primary Uses
- Repair and structural strengthening of reinforced concrete, brickwork, stone, wooden, and tuff elements
- Upgrading seismic performance of structures in high-risk zones
- Setting terminal anchors and anti-delamination connectors in composite systems
- Studding and micro-stitching
- Substitute for metal tie-rods in masonry for reinforced structural strengthening
- Reducing deformation under service loads and increasing stiffness
- Increasing load-bearing capacity and fatigue strength
- Enhancing overall durability of structures
Key Advantages
- Extremely lightweight, allowing for quick and easy application without special handling equipment
- No risk of corrosion compared to traditional metal reinforcement methods
- No need for temporary supports during application
- Consistent quality and performance due to controlled production process
FEATURES & BENEFITS
Maperod C
Pultruded carbon fiber bars with an epoxy matrix, available in diameters of 8, 10, and 12 mm. High tensile strength of 2,000 N/mm², modulus of elasticity of 155 GPa, and elongation at failure of 1.5%.
Maperod G
Pultruded glass fiber bars with an epoxy-modified vinylester matrix, available in a diameter of 10 mm. High tensile strength of 760 N/mm², modulus of elasticity of 40.8 GPa, and elongation at failure of 2%.
Key Specifications
DOWNLOADS & DATA SHEETS
Key Performance Benefits
Maperod C
Pultruded carbon fiber bars with an epoxy matrix, available in diameters of 8, 10, and 12 mm. High tensile strength of 2,000 N/mm², modulus of elasticity of 155 GPa, and elongation at failure of 1.5%.
Maperod G
Pultruded glass fiber bars with an epoxy-modified vinylester matrix, available in a diameter of 10 mm. High tensile strength of 760 N/mm², modulus of elasticity of 40.8 GPa, and elongation at failure of 2%.
Storage & Handling Guidelines
- Store in original unopened container in cool, dry indoor conditions.
- Keep away from direct sunlight, rain, and extreme heat.
- Shelf life is 12 months when stored properly between +5°C and +35°C.
Why Buy From pilehead.com?
FREQUENTLY ASKED QUESTIONS
RATINGS & REVIEWS
Be the first to review this product
Share your project experience, workability, and technical results with other engineers and contractors in the UAE.
