PILEHEAD
MAPEWRAP C CONNECTOR

Mapei

MAPEWRAP C CONNECTOR

Pultruded carbon fibre connectors with one splayed end to be impregnated to make anchoring ties
Write a review
SKU: MAPEI-MAPEWRAP-C-CONNECTOR-782

About this itemMAPEI CERTIFIED

  • Material Composition: Made of high-strength carbon fibers with an epoxy resin matrix. Carbon fiber content by weight is 68%. HIGH TENSILE STRENGTH
  • Tensile Strength: Preformed end: ≥ 2,100 N/mm²; Splayed end: ≥ 4,800 N/mm². CORROSION-RESISTANT
  • Tensile Modulus of Elasticity: Preformed end: 150,000 N/mm² ± 5%; Splayed end: ≥ 230,000 N/mm². LIGHTWEIGHT
  • Elongation at Failure: Preformed end: 1.47%; Splayed end: 2.0%. MAPEI CERTIFIED

Instant Technical & Sales Hotline24/7 AVAILABLE

WhatsApp Us+971 54 765 6789
Contact for PriceEXCL. VAT
Qty:
1
Available for Order
Chat With UsGet PDF Quote
Secure Payments7-Day Returns
Product WarrantyVAT-invoice

Uses & Advantages

Primary Uses

  • Upgrading the seismic capacity of structures in high-risk zones
  • Anchoring terminal connectors and anti-delamination systems in composite structures
  • Reinforcing masonry and concrete elements through studding and micro-stitching
  • Replacing metal tie-rods in masonry for structural strengthening
  • Reducing deformation under service loads and increasing rigidity
  • Enhancing load-bearing capacity for structures undergoing changes in use

Key Advantages

  • Provides a stronger connection between structural elements and substrates
  • Resistant to corrosion, even in aggressive environments with chlorides or alkaline hydroxides
  • Lightweight and easy to handle during installation
  • High tensile and fatigue strength for long-lasting performance

FEATURES & BENEFITS

TECHNICAL DATASHEET SPEC

Material Composition

Made of high-strength carbon fibers with an epoxy resin matrix. Carbon fiber content by weight is 68%.

Tensile Strength

Preformed end: ≥ 2,100 N/mm²; Splayed end: ≥ 4,800 N/mm².

Tensile Modulus of Elasticity

Preformed end: 150,000 N/mm² ± 5%; Splayed end: ≥ 230,000 N/mm².

Elongation at Failure

Preformed end: 1.47%; Splayed end: 2.0%.

Thermal Expansion Coefficient

-2 ÷ 0 x 10⁻⁶ m/m/°C.

MapeWrap C Connector is a high-performance, unidirectional carbon fiber rod designed for structural strengthening and reinforcement applications. It is specifically engineered to enhance the connection between substrates and strengthening systems, providing exceptional durability and resistance to environmental aggressors like chlorides and alkaline hydroxides. The product is available in various lengths and diameters, with one splayed end for effective anchoring.

Key Specifications

Origin: UAE
Nominal Diameter8 – 10 mm
Density1.60 g/cm³
Nominal Area50.3 – 78.5 mm²
Workability Time (Primer90 minutes at +23°C
Workability Time (MapeWrap 1135 minutes at +23°C
Workability Time (MapeWrap 1250 minutes at +23°C
Packaging / Pack SizeMapeWrap C Connector is available in boxes of 50 pieces in the following formats: Diameter 8 mm (20/15 cm, 40/15 cm) and Diameter 10 mm (20/15 cm, 30/15 cm).
Certified standard values under UAE climate conditions.

DOWNLOADS & DATA SHEETS

Mapei MAPEWRAP C CONNECTOR TDS

Key Performance Benefits

  • Material Composition

    Made of high-strength carbon fibers with an epoxy resin matrix. Carbon fiber content by weight is 68%.

  • Tensile Strength

    Preformed end: ≥ 2,100 N/mm²; Splayed end: ≥ 4,800 N/mm².

  • Tensile Modulus of Elasticity

    Preformed end: 150,000 N/mm² ± 5%; Splayed end: ≥ 230,000 N/mm².

  • Elongation at Failure

    Preformed end: 1.47%; Splayed end: 2.0%.

  • Thermal Expansion Coefficient

    -2 ÷ 0 x 10⁻⁶ m/m/°C.

Storage & Handling Guidelines

  • Store in original unopened container in cool, dry indoor conditions.
  • Keep away from direct sunlight, rain, and extreme heat.
  • Shelf life is 12 months when stored properly between +5°C and +35°C.
Product packaging

Why Buy From pilehead.com?

Genuine Mapei Product
Competitive UAE Pricing
Bulk Order Support
Fast Jobsite Delivery

FREQUENTLY ASKED QUESTIONS

Q&A TECHNICAL HUB
The coverage depends on the specific application and the depth and diameter of the drilled holes, which should be determined by a design engineer based on tensile loads.

RATINGS & REVIEWS

Be the first to review this product

Share your project experience, workability, and technical results with other engineers and contractors in the UAE.