Mapei
MAPEWRAP C FIOCCO
Carbon fibre cord for impregnation with MapeWrap 21 (two-component super-fluid epoxy resin). MapeWrap C FIOCCO is a complete range of cord in unidirectional carbon fibre with a high modulus of elasticity. It is used for creating anchorage points for repairs, reinforcement and static upgrading of structures in reinforced cement, masonry and tuff using MapeWrap C fabrics and Carboplate. MapeWrap C FIOCCO is set in place after it has been impregnated with MapeWrap 21 two component, super-fluid, solvent-free epoxy resin, a product specially developed for impregnating MapeWrap fabrics on site. After pulling out the cord through the hole on the top of the package, cut off at the length required with a pair of scissors. Peel back the mesh on the part of MapeWrap C FIOCCO which does not need to be impregnated with resin and dip the remaining part in MapeWrap 21. After impregnation, while wearing a pair of impermeable rubber gloves, apply a light pressure with your fingers on the part of the cord which has been dipped in order to remove the excess resin. Roll the mesh back into its original position and then sprinkle fine sand on the part of MapeWrap C FIOCCO which has been dipped in the resin. An alternative method consists in rolling the said cord dipped in resin in a bed of sand. Either one of the above procedures may be used, and they are carried out to obtain a surface which offers a better grip. When the resin has set, remove the mesh from the part of the cord which is not impregnated with resin so that it is easier to open out the carbon fibres. Packaging boxes containing one 10 m long roll. MapeWrap C FIOCCO is available in various diameters (6, 8, 10 and 12 mm): - MapeWrap C FIOCCO/6: 10 m x Ø 6 mm rolls; - MapeWrap C FIOCCO/8: 10 m x Ø 8 mm rolls; - MapeWrap C FIOCCO/10: 10 m x Ø 10 mm rolls; - MapeWrap C FIOCCO/12: 10 m x Ø 12 mm rolls.
SKU: MAPEI-MAPEWRAP-C-FIOCCO-783
About this itemMAPEI CERTIFIED
- Fiber Types: Available in high-strength carbon (MapeWrap C FIOCCO), Type E glass (MapeWrap G FIOCCO), and high-strength basalt (MapeWrap B FIOCCO). HIGH TENSILE STRENGTH
- Tensile Strength: MapeWrap C FIOCCO: 4,830 N/mm², MapeWrap G FIOCCO: 2,290 N/mm², MapeWrap B FIOCCO: 2,900 N/mm². LIGHTWEIGHT
- Modulus of Elasticity: MapeWrap C FIOCCO: 234,000 N/mm², MapeWrap G FIOCCO: 81,400 N/mm², MapeWrap B FIOCCO: 85,000 N/mm². CORROSION-RESISTANT
- Elongation at Failure: MapeWrap C FIOCCO: 2%, MapeWrap G FIOCCO: 2.8%, MapeWrap B FIOCCO: 3.4%. MAPEI CERTIFIED
Instant Technical & Sales Hotline24/7 AVAILABLE
Contact for PriceEXCL. VAT
Qty:
1
Available for Order
Secure Payments7-Day Returns
Product WarrantyVAT-invoice
Uses & Advantages
Primary Uses
- Anchoring structural strengthening systems on vaulted structures and masonry walls.
- Creating connections between old perimeter walls and strengthening products like carbon fiber sheets or fabrics.
Key Advantages
- High tensile strength and excellent fatigue resistance.
- Lightweight and easy to install without requiring special lifting equipment.
- Resistant to corrosion, even in aggressive environments with chlorides or other harmful substances.
- Improves the connection between reinforcements and existing substrates.
FEATURES & BENEFITS
Fiber Types
Available in high-strength carbon (MapeWrap C FIOCCO), Type E glass (MapeWrap G FIOCCO), and high-strength basalt (MapeWrap B FIOCCO).
Tensile Strength
MapeWrap C FIOCCO: 4,830 N/mm², MapeWrap G FIOCCO: 2,290 N/mm², MapeWrap B FIOCCO: 2,900 N/mm².
Modulus of Elasticity
MapeWrap C FIOCCO: 234,000 N/mm², MapeWrap G FIOCCO: 81,400 N/mm², MapeWrap B FIOCCO: 85,000 N/mm².
Elongation at Failure
MapeWrap C FIOCCO: 2%, MapeWrap G FIOCCO: 2.8%, MapeWrap B FIOCCO: 3.4%.
Available Diameters
Carbon and glass fiber cords: 6, 8, 10, and 12 mm. Basalt fiber cords: 10 and 12 mm.
MapeWrap FIOCCO is a range of unidirectional high-strength fiber cords designed for structural and functional restoration of concrete and masonry elements, including those of historical significance. Available in carbon (C), glass (G), and basalt (B) fiber variants, these cords are used in combination with MAPEI's strengthening systems to enhance the structural integrity and seismic resistance of buildings. The cords are lightweight, durable, and resistant to corrosion and alkaline hydroxides, making them ideal for use in aggressive environments.
Key Specifications
Density (MapeWrap C FIOCCO1.8 g/cm³
Density (MapeWrap G FIOCCO2.66 g/cm³
Density (MapeWrap B FIOCCO2.67 g/cm³
Workability Time (MapeWrap Primer 190 minutes at +23°C
Workability Time (MapeWrap 1135 minutes at +23°C
Workability Time (MapeWrap 1250 minutes at +23°C
Packaging / Pack SizeAvailable in boxes containing 10 m rolls in various diameters.
Certified standard values under UAE climate conditions.
DOWNLOADS & DATA SHEETS
Key Performance Benefits
Fiber Types
Available in high-strength carbon (MapeWrap C FIOCCO), Type E glass (MapeWrap G FIOCCO), and high-strength basalt (MapeWrap B FIOCCO).
Tensile Strength
MapeWrap C FIOCCO: 4,830 N/mm², MapeWrap G FIOCCO: 2,290 N/mm², MapeWrap B FIOCCO: 2,900 N/mm².
Modulus of Elasticity
MapeWrap C FIOCCO: 234,000 N/mm², MapeWrap G FIOCCO: 81,400 N/mm², MapeWrap B FIOCCO: 85,000 N/mm².
Elongation at Failure
MapeWrap C FIOCCO: 2%, MapeWrap G FIOCCO: 2.8%, MapeWrap B FIOCCO: 3.4%.
Available Diameters
Carbon and glass fiber cords: 6, 8, 10, and 12 mm. Basalt fiber cords: 10 and 12 mm.
Storage & Handling Guidelines
- Store in original unopened container in cool, dry indoor conditions.
- Keep away from direct sunlight, rain, and extreme heat.
- Shelf life is 12 months when stored properly between +5°C and +35°C.
Why Buy From pilehead.com?
Genuine Mapei Product
Competitive UAE Pricing
Bulk Order Support
Fast Jobsite Delivery
FREQUENTLY ASKED QUESTIONS
Coverage depends on the diameter of the cord and the specific application. Ensure the holes are fully filled with resin and the fibers are properly splayed.
RATINGS & REVIEWS
Be the first to review this product
Share your project experience, workability, and technical results with other engineers and contractors in the UAE.
