Mapei
MAPEWRAP G FIOCCO
Fibreglass cord for impregnation with MapeWrap 21 (two component, super-fluid epoxy resin). MapeWrap G FIOCCO is a complete range of cord in unidirectional fibreglass. It is used for creating anchorage points for repairs, reinforcement and static upgrading of structures in reinforced cement, masonry and tuff using MapeWrap G fabrics and Carboplate. MapeWrap G FIOCCO is set in place after it has been impregnated with MapeWrap 21 two component, super-fluid, solvent-free epoxy resin, a product specially developed for impregnating MapeWrap fabrics on site. After pulling out the MapeWrap G FIOCCO through the hole on the top of the package, cut off at the length required with a pair of scissors. Peel back the mesh on the part of MapeWrap G FIOCCO which does not need to be impregnated with resin and dip the remaining part in MapeWrap 21. After impregnation, while wearing a pair of impermeable rubber gloves, apply a light pressure with your fingers on the part of the cord which has been dipped in order to remove the excess resin. Roll the mesh back into its original position and then sprinkle fine sand on the part of MapeWrap G FIOCCO which has been dipped in the resin. An alternative method consists in rolling the said cord dipped in resin in a bed of sand. Either one of the above procedures may be used, and they are carried out to obtain a surface which offers a better grip. When the resin has set, remove the mesh from the part of the cord which is not impregnated with resin so that it is easier to spread out the glass fibres. Packaging boxes containing one 10 m long roll. MapeWrap G FIOCCO is available in various diameters (6, 8, 10 and 12 mm): - MapeWrap G FIOCCO/6: 10 m x Ø 6 mm rolls; - MapeWrap G FIOCCO/8:10 m x Ø 8 mm rolls; - MapeWrap G FIOCCO/10: 10 m x Ø 10 mm rolls; - MapeWrap G FIOCCO/12: 10 m x Ø 12 mm rolls.
SKU: MAPEI-MAPEWRAP-G-FIOCCO-786
Diameters:Carbon and Glass: 6
About this itemMAPEI CERTIFIED
- Material Composition: Available in unidirectional carbon fiber (MapeWrap C FIOCCO), glass fiber (MapeWrap G FIOCCO), and basalt fiber (MapeWrap B FIOCCO) cords. HIGH TENSILE STRENGTH
- Diameter Options: Carbon and glass fiber cords are available in diameters of 6, 8, 10, and 12 mm. Basalt fiber cords are available in diameters of 10 and 12 mm. LIGHTWEIGHT
- Tensile Strength: Carbon fiber: 4,830 N/mm², Glass fiber: 2,290 N/mm², Basalt fiber: 2,900 N/mm². CORROSION-RESISTANT
- Modulus of Elasticity: Carbon fiber: 234,000 N/mm², Glass fiber: 81,400 N/mm², Basalt fiber: 85,000 N/mm². MAPEI CERTIFIED
Instant Technical & Sales Hotline24/7 AVAILABLE
Contact for PriceEXCL. VAT
Qty:
1
Available for Order
Secure Payments7-Day Returns
Product WarrantyVAT-invoice
Uses & Advantages
Primary Uses
- Structural and functional restoration of concrete and masonry elements
- Anchoring structural strengtheners on vaulted structures and facing walls
- Connecting old perimeter walls to carbon fiber pultruded sheets or fabrics for structural strengthening
Key Advantages
- High tensile strength and excellent fatigue resistance
- Lightweight and easy to install without special lifting equipment
- Resistant to corrosion, alkaline hydroxides, and aggressive substances
- Durable in aggressive environments
FEATURES & BENEFITS
Material Composition
Available in unidirectional carbon fiber (MapeWrap C FIOCCO), glass fiber (MapeWrap G FIOCCO), and basalt fiber (MapeWrap B FIOCCO) cords.
Diameter Options
Carbon and glass fiber cords are available in diameters of 6, 8, 10, and 12 mm. Basalt fiber cords are available in diameters of 10 and 12 mm.
Tensile Strength
Carbon fiber: 4,830 N/mm², Glass fiber: 2,290 N/mm², Basalt fiber: 2,900 N/mm².
Modulus of Elasticity
Carbon fiber: 234,000 N/mm², Glass fiber: 81,400 N/mm², Basalt fiber: 85,000 N/mm².
Elongation at Failure
Carbon fiber: 2%, Glass fiber: 2.8%, Basalt fiber: 3.4%.
MapeWrap FIOCCO is an innovative unidirectional fiber cord system designed for structural and functional restoration of concrete and masonry elements, including those of historical significance. Available in carbon fiber (MapeWrap C FIOCCO), glass fiber (MapeWrap G FIOCCO), and basalt fiber (MapeWrap B FIOCCO) variants, this product is ideal for structural strengthening, static, and seismic upgrades. It is used in combination with MapeWrap fabrics, Carboplate plates, or Mapegrid mesh to enhance anchorage and improve flexural and shear strength in various construction applications.
Key Specifications
Type of FiberHighstrength carbon, Type E glass, or highstrength basalt
DensityCarbon: 1.8 g/cm³, Glass: 2.66 g/cm³, Basalt: 2.67 g/cm³
Tensile StrengthCarbon: 4,830 N/mm², Glass: 2,290 N/mm², Basalt: 2,900 N/mm²
Modulus of ElasticityCarbon: 234,000 N/mm², Glass: 81,400 N/mm², Basalt: 85,000 N/mm²
Elongation at FailureCarbon: 2%, Glass: 2.8%, Basalt: 3.4%
Available DiametersCarbon and Glass: 6, 8, 10, 12 mm; Basalt: 10, 12 mm
Packaging / Pack SizeMapeWrap FIOCCO is available in various diameters and packed in boxes containing 10meter rolls.
Certified standard values under UAE climate conditions.
DOWNLOADS & DATA SHEETS
Key Performance Benefits
Material Composition
Available in unidirectional carbon fiber (MapeWrap C FIOCCO), glass fiber (MapeWrap G FIOCCO), and basalt fiber (MapeWrap B FIOCCO) cords.
Diameter Options
Carbon and glass fiber cords are available in diameters of 6, 8, 10, and 12 mm. Basalt fiber cords are available in diameters of 10 and 12 mm.
Tensile Strength
Carbon fiber: 4,830 N/mm², Glass fiber: 2,290 N/mm², Basalt fiber: 2,900 N/mm².
Modulus of Elasticity
Carbon fiber: 234,000 N/mm², Glass fiber: 81,400 N/mm², Basalt fiber: 85,000 N/mm².
Elongation at Failure
Carbon fiber: 2%, Glass fiber: 2.8%, Basalt fiber: 3.4%.
Storage & Handling Guidelines
- Store in original unopened container in cool, dry indoor conditions.
- Keep away from direct sunlight, rain, and extreme heat.
- Shelf life is 12 months when stored properly between +5°C and +35°C.
Why Buy From pilehead.com?
Genuine Mapei Product
Competitive UAE Pricing
Bulk Order Support
Fast Jobsite Delivery
FREQUENTLY ASKED QUESTIONS
The coverage depends on the diameter of the cord and the depth of the drilled holes, which should be calculated based on the thickness of the masonry.
RATINGS & REVIEWS
Be the first to review this product
Share your project experience, workability, and technical results with other engineers and contractors in the UAE.
