Mapei
MAPEWRAP PRIMER 1
Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need to be repaired or reinforced by bonding with MapeWrap fabric and Carboplate carbon plates. Pour part B into part A and mix with a drill fitted with a stirrer until completely even. Mixing ratio: 3 parts by weight of Part A and 1 part by weight of Part B. MapeWrap Primer 1 should be applied by a brush or roller onto a perfectly clean, dry and mechanically strong concrete surface. Consumption 250-300 g/m2. Packaging 2 kg (A B).
SKU: MAPEI-MAPEWRAP-PRIMER-1-787
About this itemMAPEI CERTIFIED
- Mix Ratio: Component A : Component B = 3 : 1 by weight SOLVENT-FREE
- Workability Time: Approximately 90 minutes at +23°C TWO-COMPONENT EPOXY
- Application Temperature Range: +10°C to +30°C PROFESSIONAL USE
- Complete Curing Time: 7 days MAPEI CERTIFIED
Instant Technical & Sales Hotline24/7 AVAILABLE
Contact for PriceEXCL. VAT
Qty:
1
Available for Order
Secure Payments7-Day Returns
Product WarrantyVAT-invoice
Uses & Advantages
Primary Uses
- Priming and consolidating concrete, reinforced concrete, or masonry surfaces
- Preparing substrates for bonding MapeWrap fabrics
Key Advantages
- Solvent-free epoxy resin for safer application
- Low viscosity for easy application, including on vertical surfaces
- Excellent adhesion to concrete and other substrates
- Suitable for consolidating and priming porous substrates
FEATURES & BENEFITS
Mix Ratio
Component A : Component B = 3 : 1 by weight
Workability Time
Approximately 90 minutes at +23°C
Application Temperature Range
+10°C to +30°C
Complete Curing Time
7 days
Adhesion to Concrete
> 3 N/mm² (after 7 days at +23°C - concrete failure)
Consumption
250-300 g/m² per coat
MapeWrap Primer 1 is a solvent-free, two-component epoxy resin-based primer specifically formulated for the MapeWrap system. It is designed to prepare and consolidate concrete, reinforced concrete, or masonry surfaces for the application of MapeWrap fabrics. With its low viscosity and ease of application, MapeWrap Primer 1 ensures excellent adhesion and substrate priming, even on vertical surfaces.
Key Specifications
Consistency of MixLiquid
Density of Mix1.1 g/cm³
Brookfield Viscosity300 mPa·s (shaft 1rev. 10
Setting Time at +23°C34 hours
Complete Curing Time7 days
Application Temperature Range+10°C to +30°C
Packaging / Pack SizeMapeWrap Primer 1 is available in 2 kg units, consisting of Component A (1.5 kg) and Component B (0.5 kg).
Certified standard values under UAE climate conditions.
DOWNLOADS & DATA SHEETS
Key Performance Benefits
Mix Ratio
Component A : Component B = 3 : 1 by weight
Workability Time
Approximately 90 minutes at +23°C
Application Temperature Range
+10°C to +30°C
Complete Curing Time
7 days
Adhesion to Concrete
> 3 N/mm² (after 7 days at +23°C - concrete failure)
Consumption
250-300 g/m² per coat
Storage & Handling Guidelines
- Store in original unopened container in cool, dry indoor conditions.
- Keep away from direct sunlight, rain, and extreme heat.
- Shelf life is 12 months when stored properly between +5°C and +35°C.
Why Buy From pilehead.com?
Genuine Mapei Product
Competitive UAE Pricing
Bulk Order Support
Fast Jobsite Delivery
FREQUENTLY ASKED QUESTIONS
The consumption rate for MapeWrap Primer 1 is approximately 250-300 g/m² per coat.
RATINGS & REVIEWS
Be the first to review this product
Share your project experience, workability, and technical results with other engineers and contractors in the UAE.
