Mapei
SILANCOLOR CLEANER PLUS
Anti-mould and anti-alga cleaning product in a watery solution. Silancolor Cleaner Plus is a water-based anti-mould and anti-alga solution used to clean surfaces damaged by mould and algae before painting with the Silancolor Plus protection system. Silancolor Cleaner Plus forms the basis of the Silancolor Plus protection system for facades, by carrying out a deep-down, cleaning and sanitising action which removes mould and algae from surfaces damaged by such organisms. Silancolor Cleaner Plus, together with the finishing system from the Silancolor Plus range, forms a highly-efficient protective cycle for the surface of walls against algae and fungi which have damaged the surface of walls. Silancolor Cleaner Plus is a cleaning solution which penetrates deep down into the surface, to guarantee thorough cleaning of algae and fungi which have caused damage to the surface of walls. Silancolor Cleaner Plus is odourless and does not contain solvents, which makes it suitable for applications in closed or poorly ventilated areas. Mix Silancolor Cleaner Plus well before use, and dilute it at a ratio of 3:1 with water (5 kg of Silancolor Cleaner Plus in 15 kg of water). Consumption the consumption is heavily influenced by the absorption of the substrate and the amount of mould and algae present on the surface. Typical consumption rate: 0.20-1 kg/m2 of ready-to-use solution. Packaging 5 and 1 kg drums.
SKU: MAPEI-SILANCOLOR-CLEANER-PLUS-1005
About this itemMAPEI CERTIFIED
- Consistency: Fluid liquid with a transparent appearance HIGH PENETRATION
- Density: Approximately 1.01 g/cm³ (EN ISO 2811-1) MOULD AND ALGAE RESISTANT
- pH: 8.00 ODOURLESS
- Application Temperature Range: +5°C to +35°C MAPEI CERTIFIED
Instant Technical & Sales Hotline24/7 AVAILABLE
Contact for PriceEXCL. VAT
Qty:
1
Available for Order
Secure Payments7-Day Returns
Product WarrantyVAT-invoice
Uses & Advantages
Primary Uses
- Deep cleaning of façades damaged by algae and mould before painting
- Preparation of surfaces for the Silancolor Plus protection system
Key Advantages
- Penetrates deeply into substrates for effective cleaning
- Contains specific additives to control mould and algae growth
- Odourless and solvent-free, suitable for enclosed spaces
- Compatible with Silancolor Plus finishing products
FEATURES & BENEFITS
Consistency
Fluid liquid with a transparent appearance
Density
Approximately 1.01 g/cm³ (EN ISO 2811-1)
pH
8.00
Application Temperature Range
+5°C to +35°C
Dilution Ratio
Ready-to-use or diluted up to 1:3 with water
Consumption
0.20-1.0 kg/m² of ready-to-use solution, depending on substrate absorption and contamination level
Waiting Time Before Painting
12-24 hours, depending on humidity and temperature, and only when the surface is completely dry
Silancolor Cleaner Plus is a water-based hygienising treatment designed to deeply cleanse and treat surfaces affected by algae and mould. It forms the foundation of the Silancolor Plus protection system for façades, ensuring long-lasting protection against microorganism growth. This odourless and solvent-free solution is ideal for both indoor and outdoor applications, even in poorly ventilated areas.
Key Specifications
ConsistencyFluid liquid
ColourTransparent
Density1.01 g/cm³
pH8.00
Application Temperature+5°C to +35°C
Consumption0.201.0 kg/m²
Packaging / Pack SizeAvailable in 1 kg and 5 kg plastic drums.
Certified standard values under UAE climate conditions.
DOWNLOADS & DATA SHEETS
Key Performance Benefits
Consistency
Fluid liquid with a transparent appearance
Density
Approximately 1.01 g/cm³ (EN ISO 2811-1)
pH
8.00
Application Temperature Range
+5°C to +35°C
Dilution Ratio
Ready-to-use or diluted up to 1:3 with water
Consumption
0.20-1.0 kg/m² of ready-to-use solution, depending on substrate absorption and contamination level
Storage & Handling Guidelines
- Store in original unopened container in cool, dry indoor conditions.
- Keep away from direct sunlight, rain, and extreme heat.
- Shelf life is 12 months when stored properly between +5°C and +35°C.
Why Buy From pilehead.com?
Genuine Mapei Product
Competitive UAE Pricing
Bulk Order Support
Fast Jobsite Delivery
FREQUENTLY ASKED QUESTIONS
The consumption rate is 0.20-1.0 kg/m² of ready-to-use solution, depending on the substrate's absorption and the level of algae and mould present.
RATINGS & REVIEWS
Be the first to review this product
Share your project experience, workability, and technical results with other engineers and contractors in the UAE.
